Looking for:
Canon eos 6d manual download |
Canon eos 6d manual download
Table Of Contents. Quick Links. See also: Instruction Manual. This basic manual covers only the most basic operations. For other features and more details, see the.
Table of Contents. Previous Page. Next Page. High-performance, digital single-lens reflex camera pages. Basic Instruction Manual This basic manual covers only the most basic operations. Page 2: Introduction After shooting, play images back and check whether they have been properly recorded.
If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused. If anything is missing, contact your dealer. The Basic Instruction Manual explains the basic procedures and features. Page Handling Precautions If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your Canon dealer or check the camera yourself and make sure it is working properly.
Dead pixels are not a malfunction. Insert a card p. Attach the lens p. Focus the subject p. Creative Zone These modes give you more control for shooting various subjects. For connection to a supply not in the U. Page Getting Started Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Detach the protective cover provided with the battery. Attach the battery. As shown in the illustration, attach the battery securely to the charger.
To detach the battery, follow the above procedure in reverse. Recharge the battery. Recharge the battery before using. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet.
Installing the Battery Open the cover. Slide the lever as shown by the arrows and open the cover. Insert the battery. Insert the end with the battery contacts. The captured images are recorded onto the card.
Setting [z1: Release shutter without card] to [Disable] will prevent you from forgetting to insert a card. Removing the Card Open the cover. Page 29 Installing and Removing the Card When the access lamp is lit or blinking, it indicates that images are being written to or read by the card, being erased, or data is being transferred. Do not open the card slot cover during this time. Also, never do any of the following while the access lamp is lit or blinking.
Set to this position when not using the camera. A blinking battery icon b indicates that the battery will be exhausted soon. Follow the steps below to set the time zone first. Set the Daylight Saving Time. Under the [52] tab, select [LanguageK]. Set the desired language. Remove the caps.
Remove the rear lens cap and the body cap by turning them as shown by the arrows. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly.
Detaching the Lens While pressing the lens release button, turn the lens as shown by Page 37 Attaching and Detaching a Lens Attaching a Lens Hood A lens hood can block unwanted light and protect the front of the lens from rain, snow, dust, etc. Before storing the lens in a bag, etc. Turn the knob left or right so that the AF points in the viewfinder look sharp. If the knob is difficult to turn, remove the eyecup. You can press the shutter button halfway.
Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture.
The exposure setting shutter speed and aperture is displayed in the viewfinder and on the LCD panel 0. Use the eight keys to select the AF point, correct the white balance, move the AF point or magnifying frame during Live View shooting, scroll around magnified images during playback, etc.
During a bulb exposure, pressing the shutter button completely will turn off the LCD panel illumination. This is called the Quick Control screen. The Quick Control screen will appear 7. Set the desired function. Select a tab. For example, the [z4] tab refers to the screen displayed when the forth tab from the left [ ] is selected.
Page Before You Start Before You Start 3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed.
If you do not want the camera to turn off automatically, set this to [Disable]. After the power turns off, you can turn on the camera again by pressing the shutter button or other buttons. The available settings are described below.
Display the electronic level. If the electronic level does not appear, set [ z button display options] so that the electronic level can be displayed. Feature Guide The Feature guide displays a simple description of the respective shooting mode, function or option.
It appears when you change the shooting mode or set a shooting function, Live View shooting, Movie shooting, or Quick Control for playback. If the Help fills more than one screen, a scroll bar will appear on the right edge. With Basic Zone modes, all you do is point and shoot while the camera sets everything automatically p.
Also, to prevent botched pictures due to mistaken operations, the main shooting function settings cannot be changed. The camera analyzes the scene and sets the optimum settings automatically. It also adjusts focus automatically by detecting whether the subject is still or moving p. Turn the Mode Dial while holding down the lock release button at the center.
Press the shutter button completely to take the picture. The captured image will be displayed for 2 sec. Page 60 The shutter speed display is blinking. Since it is too dark, taking the picture may result in a blurred subject due to camera shake.
Using a tripod or a Canon EX-series Speedlite sold separately is recommended. When the external flash was used, the bottom part of the picture came out unnaturally dark.
For details, see page You can also choose the ambience you want to convey in your images. Page 8: Special Scene Mode 8: Special Scene Mode When you set a shooting mode suiting the scene, the camera sets the optimum settings automatically.
The Quick Control screen will appear. Select the shooting mode. It also makes skin tones and the hair look softer. Shooting Tips The further the distance between the subject and background, the better.
The further the distance between the subject and background, the more blurred the background will look.
No comments:
Post a Comment